Casting mould for the production of an angel 17x19 cm

Instructions for use:
Gypsum and concrete castings - mix gypsum or concrete in a bowl with water according to the manufacturer's instructions. Grind the lumps. Slowly pour the mass into the mold to avoid bubbles and let it dry. After drying, peel the casting out of the mold, clean the edges with your finger or a cutter and paint them with acrylic paints, for example.

Tips for use:
Oil the mold with cooking oil before pouring the creative concrete. We do not recommend pouring the mold with concrete up to the upper edge, but leaving a small edge approx. 2 mm empty. When removing from the mold, keep the mold under cold running water and, if necessary, carefully tap it on a solid base - the casting can be easily removed. Sand the protruding edges.

The product is not certified for the food industry.