Casting Material for Concrete 1000 g

Creastone is a liquid concrete substance which can be used in a wide variety of uses, suitable for manufacturing bowls, mats, candle holders, flower vases and fully plastic decorative shapes (figures, reliefs and practical components) in addition. Alongside the usual shapes it is also suitable for plastic bowls sitting inside one another, plastic lids etc.
The moulds can be filled without using a releasing agent. Then we get lightly shining smooth shaped pieces. If elements are to be manufactured with visible holes, in the concrete the moulds are first coated with Formestone Stone Releasing Agent or sunflower oil etc. and are then filed with the mixed concrete after a brief initial drying time (ca 15-20 min. 2-3 days are required for hardening and another 2-3 days should be allowed for drying after removing from the mould. After drying- paining, varnishing and decorating is possible with any colouring agents.

mixing ratio: 100 g creastone: 10g water

We have tried: After trying out how to work with this creative concrete, we found that the preparation of the material and the work was not demanding and the initial concerns proved unnecessary. We prepared the mass according to the instructions and placed it in the prepared molds (a plastic cup lined with lace, a plastic bowl and a bowl with leaves). We let the concrete harden and dry for 3 days. After this time, we removed the products from the prepared molds. This created small candlesticks for tealights and a decorative bowl, in which you put succulents and decorate, for example, a rock garden outside. The product is solid and does not crumble. You can paint or colour the decoration as described in the description (in our case it was not necessary, we are satisfied with the color of the concrete). There are really no limits to creativity, every handmade piece is original.