Eyelets / Grommets with Washer inner Ø10 mm / outer Ø17, matte

The metal grommet with a matte design is suitable for sweatshirts, dresses, jackets, vests and bags. It doesn't rust.
For making holes in the material we recommend die cutter . To apply grommets use eyelet grommet setting dies and hand press, which can be found under the code 070241 or 790770.

For the riveting is suitable only the die mold and press that is listed in the description. With any different type they can not be properly attached.

Punches with a smaller diameter than the grommet should be used for elastic fabrics. For solids, the diameter of the puncher should be the same as the diameter of the grommet.