Snap Button Dies Mould for Eyelets Ø10 mm

Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press and put fabric with grommet Ø10 mm. second part is screwed into the top of the press. Diameter of screw part is 7.7 mm, diameter of bottom part, that is inserted to press is 18.9 mm. Screw-thread M8.

For this mold it is necessary to order a riveting press, which can be found under code 070241 or 790770.