The hot fix applicator will help you achieve shine and sparkle on your clothes in five seconds! The hot fix applicator is
an invaluable tool when gluing hot fixes, i.e. iron-on rhinestones or chaton roses. We simply insert the hot fix into the attachment, the glue at the end of the sequin melts, we apply it to the fabric and press it lightly.
It takes approx. 2 minutes to heat up the attachment. We can easily create beautiful decorations and patterns on fabric, jeans or bags in this way.
Supplied complete with 7 attachments (size ss6 / 2 mm, ss10 / 3 mm, ss16 / 4 mm, ss20 / 5 mm, ss34 / 7 mm - for convex hotfixes, size 5 and 9 mm for straight hotfixes) and a stand . We recommend testing on a small piece of fabric! The attachment reaches high temperatures, so do not damage the fabric if it is made of synthetic material!
The applicator heats up to approximately 350°F / 177°C. This type of movement does not have a switch.
On these pages you will find detailed instructions on how to work with the hot fix applicator .
Our tip: Before the first use, pick up 2 stones in reverse, i.e. flat side into the applicator, let the glue dissolve and remove away (the glue will stick to the attachment and the stones will hold better). After that, scoop the stones into the applicator with a glass without any problems, and the flat side is free.
The applicator has 200/300V.
Please note that the applicator is only intended for gluing glass beads and hotfixes, plastic beads will melt! 
