Dies Mould for Hole making

Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press.

The diameter of the lower part to be inserted into the press is 18.9 mm.
Thread: M8

Die mold with diameter 5 mm is suitable for grommets 060257, 060915.
Die mold with diameter 7 mm is suitable for grommets 060435, 060916.
Die Mold with 8 mm diameter is suitable for grommets 060916.
Die mold with 10 mm diameter is suitable for grommets 780730, 780731.

Please be advised, that some of the pieces might be blunt, and have to be sharpened for it to work properly.

For this mold it is necessary to order a riveting press, which can be found under code 070241 or 790770.