Safety pins length 28mm (size 1) CZECH MADE

The length of safety pin of size 1 is 28 mm. In original package there are 50 bunches. One bunch containts 12pcs of safety pins.

The length of safety pin of size 1 1/2 is 34 mm. In original package there are 50 bunches. One bunch containts 12pcs of safety pins.

The length of safety pin of size 1 1/2 is 34 mm. In original package there are 50 bunches. One bunch containts 12pcs of safety pins.

Instruction for use: Sticking area must be clean and dry. Apply glue on both sides. Especially on thin, fine fabric use glue very carefully so that it wouldn´t penetrate through the fabric. Then connect both parts firmly. By tapping on connection you will strenghten the connection. Remove redundant glue and immediately wash with water carefully. Hardened bits of glue wet with cleaning benzine and remove afterwards. Store glue in cool place but know it is not frostproof.

Very practical sewing kit in leatherette case with zip fastening. It contains 8 bobbin of threads of various colours, hand needles, pins, threading filer, buttons etc. Above all, there are scissor, nail clippers, nailfile and tweezers.

Chalk KOH-I-NOOR is resistant to mechanical damage. Compared with chalk Tomy 070106 this chalk is uneasier for drawing. On the other hand, chalk TOMY is very fragile but better for drawing on fabric (it doesn´t have to be wet).

Buttons are used to connect middle coarse types of fabric - textilex, leatherette, leather etc. Riveting is made by mini-press, which is included in the package. Alternative name: riveting buttons.